Quick Start Guide
3
2
Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on webpage. For more
information, see web operation manual.
Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay on the same network segment.
Plan usable network segment properly to connect the device to the network.
The following figures are for reference only.
Initializing the Camera
Search for the device that needs to be initialized through ConfigTool.
1)
Double-click
ConfigTool.exe
to open the tool.
2)
Click
Modify IP
.
3)
Select the searching way, and then click
OK
.
4)
Select one or several cameras in uninitialized status, and then click
Initialize
.
Select the devices to be initialized, and then click
Initialize
.
If you do not provide the email address for password reset, you can reset the password only
through XML file.
Password setting
Select
Auto-check for updates
as needed, and then click
OK
to initialize the device.
If initialization failed, click
to see more information.
