Web Configuration 45
Period setup
Figure 6-43
1) Check the day you want to configure, or click
Setting
corresponding to the day.
2) Select the period(s), and enter the start time and end time.
3) Click
Yes
to save the configuration.
Click
OK
to save the configuration. Click
Refresh
to refresh the interface.
Step 5
6.5.1.3 Snapshot
You can configure the max speed, work mode, etc. of snapshot.
Snapshot by radar is only available in ANPR mode.
Select
Setting > ITC > Snapshot
.
Step 1
The
Snapshot
interface is displayed. See Figure 6-44.
