Quick Start Guide
19
Step 7
Align the marks on the front panel with the marks on the back panel, and then slide down
the front panel to cover the Access Controller.
Step 8
Screw a screw into the bottom of the Access Controller to secure it.
Figure 4-3 Mount the Access Controller to the wall
Step 9
Remove the protection film.
4.2 DIN Rail Mount
Step 1
Attach the DIN rail to the wall with screws.
The DIN rail does not come with the Access Controller.
Step 2
Hook the lower DIN clip of the back panel onto the bottom of the DIN rail, slightly push
upwards the back panel, and then push the back panel backwards to hook the upper DIN
clip onto the top of the DIN rail.
Make sure the clips "grip" the rail on both the top and bottom of the rail.
If you want to remove the Access Controller from the rail, simply push upwards on the DIN
clip, remove the upper clip off the rail, and then lower the back panel to remove the lower
clip off the rail. No screwdrivers or special tools are required.
