Dahua Technology DHI-ARD821-W2, User Manual

Page: 12 / 18

User’s Manual
7
6 Configuration
You can view and edit general information of the button.
6.1 Viewing Status
On the hub screen, select a button from the accessory list, and then you can view the status of the
button.
Table 6-1 Status
Parameter Value
Temporary Deactivate
The status for whether the functions of the repeater are enabled or
disabled.
●
: Enable.
●
: Only disable tamper alarm.
●
: Disable.
The function is only available when the version of the DMSS app is
1.96 or later, the hub is V1.001.0000000.6.R.211215 or later, and
the button is V1.000.0000001.0.R.20211203 or later.
Battery Level
The battery level of the button.
●
: Fully charged.
●
: Sufficient.
●
: Moderate.
●
: Insufficient.
●
: Low.
Operation Mode The working mode of the button.
LED Brightness The brightness of LED lights.
Accidental Press Protection
The status for whether the accidental press protection function is
enabled or disabled.
Transmit through Repeater
The status of whether the button forwards accessory messages to
the hub through the repeater.
The function is only available when the version of the DMSS app is
1.96 or later, the hub is V1.001.0000000.6.R.211215 or later, and
the button is V1.000.0000001.0.R.20211203 or later.
Program Version The program version of the button.
6.2 Configuring the Button
On the hub screen, select a button from the accessory list, and then tap to configure the