Quick Start Guide
24
After clicking
Search setting
, enter the username and password, and make sure that they
are the same as what you set during initialization; otherwise there will be wrong password
notice.
Select the devices whose IP addresses need to be modified, and then click
Modify IP
.
Step 2
Modify IP address
Figure 4-3
Select
Static
mode, and then enter start IP, subnet mask, and gateway.
Step 3
IP addresses of multiple devices will be set to the same if you select the
Same IP
check
box.
If DHCP server is available in the network, devices will automatically obtain IP
addresses from DHCP server when you select
DHCP
.
Click
OK
.
Step 4
4.3 Logging in to Web Interface
Open IE browser, enter the IP address of the device in the address bar, and then press
Enter
Step 1
key.
If the setup wizard is displayed, finish the settings as instructed.
Enter the username and password in the login box, and then click
Login
.
Step 2
For the first-time login, click
Click Here to Download Plugin
, and then install the plugin as
Step 3
instructed.
The main interface is displayed when the installation is finished.