87
Classification
Parameter
Description
3D NR
Removes the grainy fuzzy appearances of
low light images, will handle moving
objects without leaving tails behind, and in
low light, it makes an image clearer and
sharper.
●
Basic 3D NR: The module handles noise
reduction.
●
Advanced 3D NR: The back-end
program handles noise reduction.
Generally, you can select
2D NR
and
Basic
3D NR
. If the image is not clear, select
Advanced 3D NR
, and configure the
parameters.
Gain settings
Auto Gain
The larger the gain value, the more
unstable the image.
Gain Mode
Low-temperature mode, high-temperature
mode and auto mode are contained.
FFC Settings
FFC Mode
Method of correcting the shutter.
●
Auto: According to the switch period
that you have configured, the shutter
will be corrected regularly.
●
Manual: Correct the shutter by
yourself.
FFC Period
You can configure this parameter only
when
FFC Mode
is set to be
Auto
.
Adjust time gap of correcting the shutter
automatically.
Do FFC
Click
Do FFC
to trigger the shutter
correcting for this time.
Step 7
Click
Save
.
6.1.1.3 Configuring Defective Pixel Correction
When there are a few defective pixels to be corrected, you can correct them manually.
Step 1
Select
Setting
>
Camera
>
Conditions
>
Defective Pixel Correction
.
Step 2
Select the
Enable
checkbox.
Step 3
Select the calibration mode. Generally, you can select
Picture
, and for the image with
defective pixels that appears occasionally, select
Video
.
Step 4
Click
to add the point of Defective Pixel Correction.