9
3.2 Changing IP Address
Change the Camera IP address and ensure it is fitted to the actual network segment to get the
Camera access network.
You can change one or several IP addresses through ConfigTool. You can also log in to the web to
change IP addresses.
3.2.1 Changing One IP Address
When there are only a few cameras or the login passwords of the cameras are different, change one
IP address at one time. The chapter uses logging in to web page to change IP addresses as an
example.
Step 1
Log in to the Camera web page.
Step 2
Select
Setting
>
Network
>
TCP/IP
.
Figure 3-2 TCP/IP
Step 3
Configure TCP/IP parameters.
Table 3-2 TCP/IP parameters
Parameter
Description
Host Name
Give your Camera a name (TPCDome, for example) to help others,
(a router operator, for example), know the camera information
such as shape information—dome thermal camera.
IP Address, Subnet Mask
and Default Gateway
Enter the three item values according to the actual network
segment.
