8.Features
© 2023 China Daheng Group, Inc. Beijing Image Vision Technology Branch 117
Total exposure delay
Line0/2/3
T1
T2
T3
T4
Exposure start
Image readout
Figure 8-34 Exposure delay
The following table shows the total exposure delay time for each sensor.
T1 is calculated according to the typical delay (5μs) of line0. If it is line2/3, T1 can be ignored.
T2 is calculated as 0μs.
T3 is calculated as 0μs.
T4 is calculated according to the ROI settings and features of each sensor.
The exposure delay data for each model is as follows:
Model
Exposure Delay (μs)
MER2-041-436U3M/C
Mono8/BayerRG8: 13~17
MER2-041-528U3M/C
BPP8: 11.5~14.75, BPP10: 12.85~16.775, BPP12: 15.7~21.05
MER2-135-150U3M/C
13.63
MER2-135-208U3M/C
Mono8/BayerBG8: 10.08, Mono10/BayerBG10: 13.53
MER2-160-227U3M/C
Mono8/BayerRG8: 13~17, Mono10/BayerRG10: 20.6~28.5
MER2-230-168U3M/C
Mono8/BayerRG8: 15~20, Mono10/BayerRG10: 24.2~33.8
MER2-231-41U3M/C
44.8~64.7
MER2-240-159U3M/C
Mono8/BayerGB8: 20.075
Mono10/Mono12/BayerGB10/BayerGB12: 35.15
MER2-301-125U3M/C
Mono8/BayerRG8: 15~20, Mono10/BayerRG10: 29.2~36.3
MER2-302-56U3M/C
33.8~45.1
MER2-502-79U3M/C
Mono8/BayerRG8: 17~23, Mono10/BayerRG10: 29.2~36.3
MER2-502-79U3M POL
Mono8: 17~23, Mono10: 29.2~36.3