9.Software Tools
© China Daheng Group, Inc. Beijing Image Vision Technology Branch 149
[Information display]
It will display the information of selected feature which can be a camera or a network
card. When the tree list root feature is selected, the information display window is empty.
[Refresh Devices]
Update the network adapters list and the cameras list.
[Auto Config]
Configurate the IP address of the current network card and all the devices under it. When
no network card is selected, all device IPs under the network card are configured.
[Static IP]
If this item is selected, it will use this static IP address.
[DHCP]
If this item is selected, the camera is configured to use a Dynamic Host Configuration Protocol
(DHCP) server to obtain an IP address.
[LLA]
If this item is selected, the camera will assign itself an Auto IP address (LLA, Link-Local Address),
and the Auto IP address ranges from 169.254.0.1 to 169.254.255.254.
[Device User ID]
The user-defined identity for camera settings and the content is a character string.
[Save]
Select the
Save
button, the tool will save the current configuration to the selected camera which
takes a few seconds.
[Reset Device]
The effect is the same as powering Off-On. The program inside the device is reloaded.
[Reconnect Device]
The effect is the same as closing device using SDK. After this operation, the user
can reconnect the device.
9.1.2. User Guide
9.1.2.1. Refresh Devices
If you select the
Refresh Devices
button, the tool will update the displayed network adapter and camera
information. This way you can make sure that all displayed information is up to date. It will take one second
to refresh devices, and during this period, all the buttons are disabled as the following figure shows.
Figure 9-2 Refresh devices
