Appendix 4 A15 Controller Operation Quick Guide
122
Owner’s Manual of BECS- A15 Computerized Control System
Appendix 4
A15 Controller Operation Quick Guide
Part I. Embroidery
Pattern Management "
":
memory pattern preview, letter pattern operation, delete pattern, pattern input/output, pattern function setting, etc.
A.
Input Pattern
B.
Select Pattern for Embroidery
→Use page keys to select patterns →
→
,
: use page keys to select pattern
Common Parameter Setting "
": direction, angle, X/Y scaling, priority
setting, etc.
Color-changing Sequence Setting
"
":
repeat, appliqué, needle bar color setting, etc.
C.
Modify Embroidery Parameters:
A01-A08: click to set.
D.
Under this Interface:
set color-changing sequence.
Main Interface "
":
thread trimming, main shaft jog, frame setting, color-changing and start mode setting, manual frame-moving, speed
adjustment, empty feed, etc.
E.
Frame Selection and Position
①
Frame Selection:
→
→
②
Frame Position:
→ Use direction keys
,
,
,
to adjust frame position →
F.
Embroidery Confirmation
G.
Start Embroidery
H.
Release Embroidery Confirmation
Confirm→
→ Start
Release Confirmation
→
If user, after releasing embroidery confirmation, wants to embroidery the pattern again, user need operate from step B "Select Pattern for Embroidery" again.
