Chapter 6 Memory Design Management
5.
Select the design for deletion, click
to activate the window, where
user can click
to delete the design and return to the Other Function interface
or can he click
to cancel the deletion and return to Other Function interface.
6.15 Move Frame to Make a New Design
The user often wants to embroider the boundary of a design before embroidering it, so as
to help later patching. This function can create such a design, and you can select the new
design to embroider the boundary.
1.
In embroidery preparation status, stop the frame to the point, where you want to
create the design.
2.
Click
in the main menu to enter the memory design management interface.
3.
Click
to enter the design operation selection interface.
4.
Click “Frame to Make Design” to enter into its operation interface.
5.
Click the keys to shift between satin stitch and jump stitch. Click the manual
frame-moving key to move the frame along the desired route. Click the confirm key at
every turning point to confirm the trace.
6.
Click
when the editing completes. System will hint user to input the
new design number.
Owner’s Manual of BECS- 285A Computerized Control System
67
