Chapter 4
Common Parameters and Color-Changing Order
Chapter 4
Common Parameters and
Color-Changing Order
In this system each design has its own settings of the normal parameters (like scale and
repetition) and color-changing order. When a new design is selected, the corresponding
settings of normal parameters and color-changing order will become effective.
In this chapter, we will discuss the setting of the most frequently used parameters and
color-changing orders. You can start the operations by touching
in the main interface.
Due to this system is able to perform the multi-missions at the same time, it’s possible to
set or change the normal parameters and color-changing order for the designs that are not
embroidered at present. User can have access to these operations via the Other Operation
interface in Design Management (please refer to Chapter
).
4.1 Setting of Common Parameters
The common parameters include: “X-Y Scales”, “Rotate”, “Direction”, “Prior Mode”,
“Rep. Mode”, “Rep. Prior”, “X-Y Reps” and “X-Y Interval”. Users can control the final
embroidery results by adjusting these parameters.
Click
in main interface for entering the parameter setting interface
：
The way for setting the parameter is similar to each other. This chapter will explain how
to set the “X-Y Scales” as an example and give the definitions of other parameters (Refer to
4.1.1 as reference).
38 Owner’s Manual of BECS- 285A Computerized Control System
