manualshive.com logo in svg

DAF DAVIE XDc II, User Manual, Page: 94 / 126

Share
Download
DAF DAVIE XDc II User Manual Download Page 94

8-12

©

 200706

DAVIE XDc II

Administration

NOTE

Depending on the different user levels "Senior Technician" and "Master 
Technician" only those test procedures to which the specific technician level 
has access will be displayed by the DAVIE XDc II and implemented by the 
technician.

Only the Administrator has the right to the Password settings.
If a column is selected, a virtual keyboard appears and a new user can be 
added or a selected one can be changed.

8.11

Log Files

Each Diagnostic Session of the DAVIE XDc II is automatically logged into a log 
file on the hard disk. 

You can use this function to view the saved data from "Direct Test" or "Guided 
Diagnose" which is stored into the log files with Adobe Acrobat. 

The files can be printed out or exported to a USB-Stick or other media.
When you select the "Logfiles" function a Windows box opens and the desired
"Log File" can be selected.

Figure 8-13 Selection of "Logfiles" in the function list

Summary of Contents for DAVIE XDc II































































































































Reviews:

No comments