manualshive.com logo in svg

DAF DAVIE XDc II, User Manual, Page: 90 / 126

Share
Download
DAF DAVIE XDc II User Manual Download Page 90

8-8

©

 200706

DAVIE XDc II

Administration

8.4.6

Install update from Parts Rapido online

1. Copy the unzipped files to the media (do not use a space in the folder 

name).

2. Insert the media you want to use in the DAVIE XDc II.

3. Select the function "Install update".

4. If the files have not been copied to the root of the media a screen pops up.

5. Navigate to the appropriate folder's label file and click OK.

6. Confirm the security prompt to install the inserted CD.

7. The single chassis update will occur.

8.5

Change language

To switch between the languages, until a new application CD is installed, an 
additional "Change language" selection button is available in administration. It 
is also possible for the normal user to change the language.

Figure 8-9 Select: Change language

NOTE

Each time you change the language, the application will be restarted.

Summary of Contents for DAVIE XDc II































































































































Reviews:

No comments