manualshive.com logo in svg

DAF DAVIE XDc II, User Manual, Page: 86 / 126

Share
Download
DAF DAVIE XDc II User Manual Download Page 86

8-4

©

 200706

DAVIE XDc II

Administration

8.4

Install update

There are two ways to update the DAVIE XDc II software.
You can install updates like the Runtime, Application and Parts Rapido Subset 
by new delivered CD's or you can update via the Dealernet.

8.4.1

Install update of a new Runtime CD:

For the update of the DAVIE XDc II application, a separate instruction will be 
send along with the Runtime update CD.

8.4.2

Install update of a new delivered Application CD:

1. Insert the CD you want to install use in the DVD drive.

2. Close the automatic started Windows XP screen that pops up.

3. Select the function "Install update".

4. You can install up to two languages. Select the language(s) and press 

"OK".
If only one language is selected, go to step 6.

Figure 8-4 Select language of Application

NOTE

When a first language already has been installed, a second language can be 
added. See chapter "Install second language". 

5. Select which language has to be the first language. 

Summary of Contents for DAVIE XDc II































































































































Reviews:

No comments