manualshive.com logo in svg

DAF DAVIE XDc II, User Manual, Page: 115 / 126

Share
Download
DAF DAVIE XDc II User Manual Download Page 115

©

 200706

11-3

Troubleshooting

DAVIE XDc II

WARNING

DAVIE XDc II is a safety class 1 device and is equipped with a safety tested 
power cable. It may only be connected to systems with equipment grounding 
conductors (TN systems) and grounding sockets.

WARNING

To reduce the risk of electric shock, do not use on wet surfaces or expose to 
rain.

11.2.3

Touchscreen (optional)

There are problems in using the touchscreen, the position where your fingertip 
presses the screen and the cursor position is different.

Solution:

To solve this problem, use the original documentation which is delivered with 
the laptop.

11.3

Software installation

11.3.1

Windows Explorer popup

After selecting the function "Install update", first the DAVIE XDc II checks if the 
label-file is present on an expected location on the CD and removable media. A 
Windows Explorer pops up if the file can not be found.

Figure 11-1 Windows popup

Possible causes for these problems are:

No CD in DVD drive
Not a DAVIE XDc II Application data CD
Not a Parts Rapido Subset CD

Summary of Contents for DAVIE XDc II































































































































Reviews:

No comments