manualshive.com logo in svg

DAF DAVIE XDc II, User Manual, Page: 105 / 126

Share
Download
DAF DAVIE XDc II User Manual Download Page 105

©

 200706

9-9

VCI Configuration Manager

DAVIE XDc II

ARP Cache (sec.)

Address Resolution Protocol Cache expiration 
time: TCP Parameter, onlyused by Network 
Administrators.

TCP Keepalive Time (sec) TCP Parameter, only used by Network 

Administrators.

Connection Management

Enabled:

Connection Management is active. 
Two profiles ("Preferred"/"Alternative") are 
supported. After power up the VCI configures 
itself and uses profile "Preferred". If no 
connection from DAVIE is established within a 
certain time, VCI switches its configuration to 
profile "Alternative". In this mode it waits an 
unlimited time for incoming connections.

Disabled:

Connection Management is not active.

Profile

Preferred:

Configure profile "Preferred".

Alternative

Configure profile "Alternative".

Profile switching time (sec) Waiting time to switch to other profile if no 

communication is established with preferred 
profile.

NOTE

For the Preferred and the Alternative profile the same IP address has to be 
used. To restart this process the VCI has to be powered again.

Load / Save / Delete Profiles

Save Profile

Save the configuration in a profile file.

Load Profile

Load the configuration from a previously saved 
profile file.

Delete Profile

Delete a previously saved profile file.

9.2.4

Common Settings

This page contains status information and controls features of the VCI and VCI 
Configuration manager settings which are not in context with Basic Setup:

• Language selection VCI Configuration Manager.

• Enable/disable WLAN interface.

• Setting VCI buffer time.

• Enable/disable VCI buffering.

• Selftest.

Summary of Contents for DAVIE XDc II































































































































Reviews:

No comments