manualshive.com logo in svg

DAF DAVIE XDc II, User Manual, Page: 101 / 126

Share
Download
DAF DAVIE XDc II User Manual Download Page 101

©

 200706

9-5

VCI Configuration Manager

DAVIE XDc II

To check this setting, use the following instructions:
- Press with the <right touchpad key> on the Wireless Zero Configuration tray 

icon.

- Select <Use Windows to manage WI-Fi> 
- Then click "Start", click "Control Panel", click "Network and Internet 

Connections", and then right click "Wireless Network connection", click 
"Properties" and chose "Wireless Networks".

- The checkbox must be selected.

NOTE

The firmware version may only differ from the DAVIE XDc II and VCI right after 
a VCI software update on the DAVIE XDc II. The firmware on the VCI will be 
updated when the DAVIE XDc II application is started next time. This update 
takes approximately one minute time.

9.2.2

Basic Setup

This screen is normally used to select a Wireless network adapter or to change 
the VCI-ID Network Name (SSID).

If more than one VCI is used in the same workshop, the Basic Setup can be 
used to easily setup a unique VCI-ID Network Name (SSID).

First connect the USB cable between the VCI and the DAVIE XDc II and 
connect the VCI with the Vehicle Diagnostic Cable to the vehicle before 
selecting the "Basic Setup" screen.

Figure 9-6 Basic Setup screen

Summary of Contents for DAVIE XDc II































































































































Reviews:

No comments