Daewoo RC900M0001, Service Manual

Page: 12 / 33

1) TAKE THE CORD REEL ASSEMBLY OUT OF THE BODY ASSEMBLY.
2) UNSCREW THE SCREW(20).
3) SEPARATE THE BOBBIN(6) FROM THE BRACKET(1) AND CHECK CONTACT
BETWEEN THE Y TYPE TERMINALS(14,15) AND THE RING TYPE TERMINALS(8,9).
4) CHECK THE LEVER SPRING(4).
5) IF THE ROLLER BRAKE(3) IS WORN OUT AND SEPARATE THE LEVER(2)
FROM THE BRACKET THEN REPLACE THE ROLLER BRAKE(3).
AT THIS TIME, THE BOBBIN(6) IS ROTATED COUNTERCLOCKWISE DUE TO
THE PRESERVED WINDING.
6) IF THE REEL SPRING(18) IS BROKEN, UNSCREW THE 2 SCREWS(19) AND REPLACE IT.
7) UNSCREW THE SCREW (12) AND SEPARATE THE HOLDER TERMINAL(7) FROM
THE BOBBIN(6).
8) CHECK CONNECTION BETWEEN THE POWER CORD(10) AND THE RING TERMINALS(8,9).
9) WHEN ASSEMBLING, MAKE THE RESERVED WINDING 5 REVOLUTIONS OF THE BOBBIN
CLOCKWISE.
CAUTION
WHEN DISASSEMBLING, THE REEL SPRING
MAY
SPRING OUT OF THE COVER.