9.1.30. Crankshaft
•
Remove the bolts from bearing caps.
•
Remove the main bearing cap fixing
bolts in the order of assembling.
•
(Remove them in /the same way of
the cylinder head bolts.)
•
Maintain the removed bearing caps in
the order of cylinders.
•
Temporarily install the bolts at the both
side of crankshaft, and lift the shaft
with a rope.
NOTE : Do not mingle with the metal bearings and bearing caps randomly. To prevent mixing,
temporarily assemble the metal bearings to the corresponding bearing caps in turn.
9.1.31. Camshaft and Tappet
•
Pull out the tappets from the cylinder
block.
•
Remove the camshaft being careful
not to damage the camshaft and its
bearings.
9.1.32. Oil Spray Nozzle
Remove the oil injection nozzle fixing
bolts and tear down the oil injection
nozzles.
9.1.33. Cylinder Liner
By means of a special tool (Extractor),
pull out the liner from the cylinder
block.
- 75 -
EFM2029I
EFM2030I
