9.3.27. Cooling water pump
•
Attach the gasket of the fresh water
pump. (at cylinder block side)
•
Assemble the fresh water pump by
tightening the fixing bolts. (zigzag
method)
•
Insert the thermostat of fresh water
pump.
•
Insert the O-ring to the thermostat
and assemble the cooling water
pipes by tightening the fixing bolts.
9.3.28. Intake manifold
•
Attach the new gasket to the cylinder
head side.
•
Assemble the intake manifold by
tightening the fixing bolts.
•
Attach the gasket to the inlet flange
and assemble by tightening the fixing
bolts.
•
Assemble both sides by the above
method.
•
Attach the gasket to the equalizing
pipe that connects the intake
manifolds of both sides and
assemble both manifolds by
tightening the fixing bolts.
9.3.29. Exhaust Manifold
•
Connect the exhaust manifold that is
consists of two sets after inserting
the exhaust gas ring between them.
•
Attach a new gasket to the exhaust
manifold.
•
Attach a gasket to the exhaust elbow
that Is connected to the exhaust
manifold, and assemble the elbow by
tighten the nuts for connection.
•
Assemble both sides in the same
method as above.
- 108 -
EFM2081I
EFM2082I
EPM2026I
