9.3.7. Camshaft
•
Coat the cam bush of cylinder block
and camshaft with engine oil.
•
Assemble the cam bush and camshaft
for them not to be damaged.
•
Assemble the crankshaft gear and the
camshaft gear making sure that the
gear marks on both gears are aligned
together as right figure.
9.3.8. Flywheel housing
•
Coat the thrust washer fixing bolt with
an adhesive and tighten it with
specified torque.
•
Coat the oil seal with lubricating oil
and assemble it carefully not to be
deviated or damaged by means of
special tool. (Mandrel for assembling).
•
Attach the gasket on the surface of
cylinder block where the flywheel
housing is to be installed. (In order to
prevent the gasket slip down, coat a
grease on the cylinder block surface.)
•
Temporarily assemble 2ea of guide
bolts for installing the flywheel
housing to the cylinder block.
•
After fitting the flywheel housing holes
to the guide pins and engage
temporarily 2 ~ 3 threads of fixing
bolts, and according to the tightening
order (zigzag method) tighten them in
the specified torque.
- 97 -
1 1
1
EFM2063I
EFM2065I
Camshaft gear
Torque
4 kg.m
Torque
7 kg.m
