13
Ceramic PTC Fan Heater
Model No. HEA1897
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Using the Remote Control
The
Remote Control
(6) duplicates the controls on the
Control Panel
(1) allowing
you to control your air cooler remotely.
If using the Remote Control for the first time, pull
the tab from the battery compartment as shown
right:
Replacing the Battery in the Remote Control
If the Remote-Control range has become reduced or it has stopped working
altogether the battery will need replacing as shown below:
Battery Safety Warnings
•
CAUTION: There is a danger of explosion if the battery is incorrectly fitted.
•
Ensure that the battery is installed with the correct polarity.
•
It is recommended that battery is removed if the remote if it is not to be used
for a long period of time or if the remote is to be disposed of.
•
Replace only with the same or equivalent battery type.
•
Store batteries in a cool dry place.
•
Do not expose the battery to sunshine, fire, heat or similar, never dispose of
batteries in a fire.
•
Do not charge non-rechargeable batteries.
•
Do not short-circuit batteries.
•
Exhausted batteries are to be removed from the product and safely disposed of.
WARNING!
•
Do not ingest the battery, Chemical Burn Hazard.
•
The remote control supplied with this product contains a coin/button cell
battery.
•
Keep out of reach of children swallowing can lead to chemical burns, perforation
of soft tissue and death. Severe burns can occur within 2 hours of ingestion. See
medical attention immediately.
A
Push the tab on the
battery compartment in
the direction of the arrow
as shown above.
B
Slide out the battery
compartment and insert a new
CR2025 battery
ensuring the
positive polarity marking is
uppermost.
C
Slide the battery
compartment back into
the Remote Control
.
