Daewoo DWF-830H, Service Manual

Page: 33 / 47

10. PRESENTATION OF THE P.C.B ASS’Y
32 TROUBLE SHOOTING
MESSAGE CAUSE SOLUTION
Improper installation of drain hose.
The drain hose is blocked up by foreign
matter.
Drain motor is inferior.
The water tap is closed.
The water inlet filter clogged.
It passes over the 30 minutes, yet it doesn’t
come to assigned water level.
Wash loads get uneven during spin.
Poor installation of the unit.
The lid is opened.
The switch cover is inferior
The load sensing is inferior. After the load
sensing operates about 7 seconds, the
message is displayed during 1 second and
water level is always fixed ‘high’.
The water level sensing is inferior.
Install drain hose properly.
Remove foreign matter from drain hose.
Change drain motor.
Open the water tap.
Clean the water inlet filter.
Check whether or not is comes to the
assigned water level.
Re-set wash loads evenly.
Proper installation.
Close the lid.
Change the switch cover.
Change the P.C.B. ASS’Y.
Check the water level sensor and the
contact part of the connector.
C o n c e r n i n g E r r o r M e s s a g e