28
TROUBLE SHOOTING
PROBLEM
WATER SUP-
PLY IS NOT
STOPPED.
CHECK POINT
Does the water supply
continue while the power
is turned off?
Does the water supply start
as soon as you press the
power switch?
Operate the washer after
setting the water level to
“HIGH”
Does the water supply
continue after the water
reaches to the “HIGH”
level?
Is the air tube of water
level switch kinked or
deformed?
CAUSE
SOLUTION
Change the water inlet
valve.
The water inlet valve is
defective.
The triac of P.C.B is
defective.
Change the P.C.B ASS’Y.
Normal operation.
Change the air tube.
Air tube is defective.
Change the pressure
switch.
Pressure switch is defec-
tive.
YES
YES
YES
NO
NO
NO
NO
YES
PROBLEM
THE WASHER
DOES NOT
DRAIN.
CHECK POINT
Do you install the
drain hose properly?
Is the foreign matter
accumulated inside
the pump housing?
Is the output voltage of
the drain pump normal?
CAUSE
SOLUTION
Install the drain hose
properly.
Remove the foreign mat-
ter from the pump hous-
ing
Change the Drain pump
Change the P.C.B ASS’Y.
Improper installation
Malfunction of drainage
by the foreign matter
Drain pump is defective
P.C.B ASS’Y is defective.
YES
NO
NO
NO
YES
YES
Concerning Draining
Summary of Contents for DWF-830H
