background image

10

RES.

RES.

WASH TIME CONTROL

• 

As the control button is pressed, wash time will be repeated as
following;

12

15

➝ 

18

➝ 

➝ 

➝ 

9min.

 If you don’t want wash process, you must adjust wash time to 0 min..

RINSE TIMES CONTROL

• 

As the control button is pressed, rinse times will be repeated as
following;

2

➝ 

3

➝ 

4

➝ 

➝ 

1 time(s)

 If you don’t want rinse process, you must adjust rinse times to 0 times.

SPIN TIME CONTROL 

 As the control button is pressed, spin time will repeated as following;

➝ 

➝ 

➝ 

3min.

 If you don’t want spin process, you must adjust spin time to 0 min..

Reserved Washing

• 

Reservation can be made from 2 hours to 48hours.

• 

Procedure to press the button.

example) To make reservation to complete washing in 8hours.

 

Now the reservation is made.

 

If you want to check the selected program, press the "START/HOLD" button again.

PARTIAL PROCESS & COMBINATION

adjust to "8"

CONVENIENT OPERATION FOR SPIN ONLY

• 

If you want spin only, it is convenient to operate 

the button as following;

"--" shall blink

Select the program.
Adjust to water level
and water temperature.

HOURS

MIN

HOURS

MIN

CONTROL

CONTROL

CONTROL

CONTROL

 DWF-800W/802W/750M/752M  00.5.25 10:45 AM  ˘

`

10

Summary of Contents for DWF-800M
















Reviews: