Discharge hose
The second step is to install the discharge hose
.
The discharge hose can be fabric
,
just make sure to use
a hose clamp to secure the hose to the barb
.
This will prevent the hose from disconnecting under high pressure
.
Note: A short and large-diameter hose is preferred over any other
.
A short and large diameter will provide
lower fluid friction and improve efficiency
.
Engine oil
Engine oil is an important factor in determining the performance and life of your engine
.
Always make sure
the oil level is within the upper and lower limits specified on the oil dipstick
.
Make sure to check the engine
oil on a level surface or incorrect readings will result
.
•To check the engine oil
,
first
,
remove the oil dipstick by turning counterclockwise
.
•Wipe the dipstick clean and insert the dipstick back into the oil filler neck
.
Do not screw it in
.
Please refer
to Fig 2-1
.
•If the level is low
.
fill engine oil to the top of the oil filler neck with the recommended oil below
.
Below is a table of recommended oil grades for the engine in various weather conditions.
Please use the proper oil according to the Table 2-1
.
Fig 2-1
.
Illustration of checking the engine oil
Fig 2-1
.
Illustration of checking the engine oil
4
Summary of Contents for DDA80
Page 9: ...8...
Page 19: ...9 EXPLOSION VIEWS AT2C E 4 AT3C E 4 18...
Page 21: ...AT4C E 4 20...
Page 23: ...AT3CLE 4 22...