Note
:
After operation of the pump during winter
.
be sure to drain all the liquid out of the pump to prevent damage
t0 the pump
.
The pump may be damaged if left over liquid in the pump freezes
.
7. TRANSPORTING AND STORAGE
A few guidelines need to be followed before transporting the pump
.
Below is a list of in- structions to be followed
during transportation
.
•When transporting the pump,turn the fuel valve off and keep the pump on a level surface to prevent fuel
spillage
.
•Secure the pump unit to a fixed object when transporting to prevent the pump from bouncing around
.
Conti-
nuous bouncing around can damage the pumps internals
.
Before storing the pump for long periods of time
,
please follow the guidelines below
.
•Clean the pump interior before stopping the pump
.
Remove the pump drain plug and empty all fluids from the
pump
.
Leaving fluid in the pump will cause rapid corrosion to the impeller
.
•Turn the fuel valve to the “Off” position and empty all ofthe fuel out ofthe gas tank
.
Note
:
While dealing with diesel
,
do not smoke or allow flames to come near the fuel as
accidents may occur
.
Failing to do so will lead to serious injuries and death
.
•Chage the engine oil
•Remove the cold start oil fill plug and pour about a tablespoon of oil into the cylinder
.
Crank the engine several
times
.
•Pull the starter rope until resistance is felt
.
Doing this will put the cylinder on the compression stroke
;
where
both intake and exhaust valves are closed
.
Having these two valves closed will prevent moisture from getting
into the combustion chamber and causing corrosion
.
•Cover the engine and pump and store in a dry place
.
15
Summary of Contents for DDA80
Page 9: ...8...
Page 19: ...9 EXPLOSION VIEWS AT2C E 4 AT3C E 4 18...
Page 21: ...AT4C E 4 20...
Page 23: ...AT3CLE 4 22...