If the engine comes with an electric starter,turn the starting switch to the“Off”position.
Pull the recoil handle slowly until pressure is felt by your hand
,
this means the piston is on the compression
stroke
;
where the intake and exhaust valves are closed and then let the handle recoil back into the engine
.
This
natural position will prevent rust from occurring when the engine is being stored for long periods of time
.
Perform
these steps only when the engine is off
;
doing so otherwise will damage the engine
.
6. MAINTENANCE
Oil check
During operation
,
it is a good idea to check the oil every morning to ensure the engine has sufficient oil
.
Oil change
Engine oil is a critical factor in determining the life of your engine
.
Change the engine oil on time.Change the
engine oil more frequently if the engine is used in dusty areas
.
Changing the oil while the engine is still warrfl will yield best results for the engine
.
When the oil is still warm
,
you
get rapid and complete draining of the oil
.
Oil change procedures
•Remove the oil filler cap and drain plug to drain the oil
•Install the drain plug
,
and tighten it securely
.
•Refill with the recommended oil and check the oil level
.
•Install the oil filler cap
.
The engine oil capacity is .60 liters or .63 US quart
s
SAWl0W.30 0R
EQUIVALENT
MOTOR ASAE
10W-30
CHANGE THE OIL AFTER THE
FIRST MONTH 0R AFTER 20
HOURS
,
WHICHEVER COMES
FIRST
.
AFTER THIS
.
EVERY 6
MONTHS OR 100 HOURS
.
WHICHEVER COMES FIRST
.
DRAIN
FILL 0.6L 0IL
11
Summary of Contents for DDA80
Page 9: ...8...
Page 19: ...9 EXPLOSION VIEWS AT2C E 4 AT3C E 4 18...
Page 21: ...AT4C E 4 20...
Page 23: ...AT3CLE 4 22...