11
CH3. UPGRADING THE SYSTEM
2. Upgrading the memory:
I n s t a l l i n g
① Locate the two clips that hold the memory moudle in place. One clip
holds the left edge of the moudle and the other clip holds the right
d e g e.
② Push both clips aw ay from the socke t .
③ Position the DIMM over the socket so that the notch at the bottom of
the module lines up over the divider in the socket. AS shown in the
n ext picture, match the wide part of the module to the wide part of
the opening in the socke t .
④ Push the module streight down into the socke t .
n o t c h e s
DIMM Socket
DIMM
memory module
To insert DIMM module:
Position bottom notches over
socket dividers as shown.