Daemyung Webgate HDC420F-PD, User Manual

Page: 68 / 118

67
Event Configuration
Event
Event set up has 4 set up procedures, event, motion, sensor, and
preset.
event
configures time range with event synchronization and can be
configured as off, always, and custom
“always” recognizes and reacts to event when it is configured.
“custom” can only use event during the time preset based on
schedule settings
If custom is configured, event time can be configured per day/time
through schedule setting window
If time isn’t configured on custom or Off box is checked, DVR won’t
recognize any event and thus no event motion or event record will
run.
User schedule setting
If day/time are set, it will display on the graph right away.
Select record begin/end time on the graph and click
them in
order, and the corresponding info will be displayed on day/time.
• Day : set applicable day
• Time : set applicable time
• Add : schedule registration function
• Delete Selected : schedule unit delete function
• Delete All : whole schedule delete function
Delete schedule
• Delete selected schedule – Select schedule to be deleted then
click on delete button. Click on delete button without select item,
previously selected item will be deleted first and deletion will be
achieved in reverse of time set up.
• Delete all – To delete all schedule.
menu

event

event