DAELIM VJF125, Service Manual

Page: 38 / 288

2-15
INSPECTIONS / ADJUSTMENTS
•
Fill the radiator with new coolant.
COOLANT CAPACITY : 1,100
± ±
20cc
RADIATOR CAPACITY : 1,000 ± ± 20cc
RESERVE TANK CAPACITY: 280
± ±
20cc
•
Start the engine. Bleed air from the coolant and
check the level of coolant.
•
Install the radiator cap.
•
Fill the coolant with the reserve tank up to the
upper level.
•
Erect the main stand prior to beginning work.
•
Check the coolant level and the reserve tank.
•
The level should be between the “UPPER” and
“LOWER” level lines.
•
Fill the coolant to the reserve tank up to the “F”
(upper level).
•
Remove the radiator cap.
•
Remove the drain bolt and drain the coolant. (Tilt
the vehicle to the right in order to assure complete
and rapid draining.)
•
Install the drain bolt.
COOLANT LEVEL INSPECTION
COOLANT REPLACEMENT
•
Unless the coolant is refilled or replaced, the
engine temperature too high or low.
•
Fill to the “F”(UPPER LEVEL) line.