English 19
Ins
tallation ins
truc
tions
Installation instructions
Installing your gas range
NOTE
•
IMPORTANT
: Please read the following instructions, as well as the Important
Safety Instructions section at the front of this manual, completely and
carefully BEFORE installing and/or operating the gas range. Improper
installation, adjustment, service, or maintenance can cause personal injury or
property damage.
•
To order parts or accessories, contact
your local retailer or refer to the last
page.
•
To ensure proper installation, we
strongly recommend that you hire a
professional installer.
Step 1. Unpack the range
Remove all packaging materials. Failure to remove packaging materials could
result in damage to the appliance.
Inventory all loose parts against the 'Parts supplied' overview on page
.
Check for shipping damage and/or missing parts. Any damage and/or missing
parts should be reported to your local retailer.
Step 2. Connect the range to gas supply
Shut off the main gas supply valve before disconnecting the old range and leave
it off until the new hookup has been completed. Don’t forget to relight the pilot on
other gas appliances when you turn the gas back on.
Because hard piping restricts movement of the range, the use of a CSA
International-certified flexible metal appliance connector is recommended unless
local codes require a hard-piped connection.
CAUTION
•
If the information in this manual is not followed exactly, a fire or explosion
may result, causing death, personal injury, or property damage.
•
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
•
WHAT TO DO IF YOU SMELL GAS:
-
DO NOT light a match, candle, or cigarette.
-
DO NOT try to light any appliance.
-
DO NOT touch any electrical switch.
-
DO NOT use any phone in your building.
-
Clear the room, building, or area of all occupants.
-
Immediately call your gas supplier from a neighbor’s phone. Follow the
gas supplier’s instructions.
-
If you cannot reach your gas supplier, call the fire department.
•
Installation and service must be performed by a qualified installer, service
agency, or gas supplier.
•
Never use an old connector when installing a new range. If the hard-piping
method is used, you must carefully align the pipe; the range cannot be moved
after the connection is made.
•
To prevent gas leaks, apply pipe-joint compound or wrap pipe-thread tape
with Teflon on all male (external) pipe threads.
DG68-01512A-00_IM_DOP48x960GMES+CFR.indb 19
DG68-01512A-00_IM_DOP48x960GMES+CFR.indb 19
2023-04-07 오후 5:22:37
2023-04-07 오후 5:22:37
