Troubleshooting
English
37
Troubleshooting
Checkpoints
If you encounter an issue to check with the dishwasher, first check the table below and try
the suggestions.
Symptom
Possible Cause
Action
The dishwasher does
not start.
The door is not completely
closed.
• Make sure the door is
latched and completely
closed.
• Make sure the upper rack
is properly joined with the
duct nozzle.
• Make sure the upper rack is
properly assembled.
The
START
(Reset) Button is not
selected.
• Make sure the door is
latched and completely
closed. Then, press
START
.
No cycle is selected.
• Select a cycle.
The power cord is not
connected.
• Connect the power cord.
Water is not being supplied.
• Make sure the water supply
valve is open.
The control panel is locked.
• Unlock the Control Lock
function.
The dishwasher takes
too long to start
operation.
The dishwasher is connected to
a cold water supply.
• To work properly, the
dishwasher must be
connected to a hot water
supply. If connected to
a cold water supply,
additional time is required
to heat the cold water.
The dishwasher has
bad odours.
Water remains from the
previous cycle.
• With the dishwasher empty,
add detergent, and then run
the Normal cycle to clean
the dishwasher.
The drain hose is obstructed.
• Contact a qualified service
technician to remove any
obstruction from the drain
hose.
The dishwasher is not used
daily or soiled dishes are left in
unit too long.
• With the dishwasher empty
and no detergent, place
a glass with 8 ounces of
vinegar upright into the
lower rack, and then run the
Normal cycle.
DACOR_DW9500MD_DD68-00196A-05_EN.indd 37
DACOR_DW9500MD_DD68-00196A-05_EN.indd 37
2021-06-14 오후 4:01:37
2021-06-14 오후 4:01:37