Accessory Bracket Installation Guide
Important Before You Start
Please read the “Instructions-for-Use” device manual carefully and completely before using Dabir products.
Failure to do so may result in decreased performance or product failure.
See Dabir Instructions for Use
(DOC# R01-0006-00004) for system operation.
DabirAIR® Accessories: Assembly Steps (Example: Bed Rail Bracket - Other mounting brackets may
apply)
1. To prevent product damage, prepare your work table area by covering it with a protective cloth or mat.
2. Identify key components and features of the device prior to assembly.
3. Firmly locate the Bracket hook into the
Controller receiving pocket on the underside of the
Controller. (Proper locating is critical for Step 4.)
4. Hand adjust bracket position such that the
threaded inserts and bracket holes align.
5. Insert the two threaded fasteners and tighten.
(DO NOT OVERTIGHTEN)
6. The bracket assembly is now complete.
NOTES:
Follow these same assembly steps for
other DabirAIR mounting accessories.
(Assembly tool and screws included.)
Electronic copy available at www.dabir-surfaces.com/IFU
DOC# R01-0006-00190-
E
A
1
Controller receiving pocket
(Bottom side of Controller shown)
Bracket Hook
Finished
Assembly
Controller
Step 3
Bracket
Cap Screws
Align and install
Threaded Fasteners
Steps 4 & 5
Threaded Inserts
