DAB MCE-150/P, Instructions Manual

Page: 70 / 1024

ENGLISH
68
1.2 Technical specifications
Table 1 shows the technical specifications of the products in the range referred to in this manual.
Technical specifications
MCE-22/P MCE-15/P MCE-11/P
Inverter power
supply
Voltage [VAC]
(Tol +10/-20%)
220-240 220-240 220-240
Phases 1 1 1
Frequency [Hz] 50/60 50/60 50/60
Current [A] 22,0 18,7 12,0
Leakage current to earth [ma] <2,5 <2,5 <2,5
Inverter output
Voltage [VAC] 0 - V alim. 0 - V alim. 0 - V alim.
Phases 3 3 3
Frequency [Hz] 0-200 0-200 0-200
Maximum current[A rms] 10,5 8,0 6,5
Minimum pump current
[A rms]
1 1 1
Max. power output [kVA] (400
Vrms)
2,8 2,0 1,5
Mechanical power P2 3 CV / 2,2 kW 2 CV / 1,5 kW 1,5 CV / 1,1 kW
Mechanical
specifications
Unit weight [kg]
(excluding packaging)
6,3
Maximum dimensions
[mm](WxHxD)
173x280x180
Installation
Work position Any
IP protection rating 55
Max. ambient temperature [°C] 40
Max. section of lead accepted by
input and output terminals [mm²]
4
Min. diameter of cable accepted
by input and output cable glands
[mm]
6
Max. diameter of cable accepted
by input and output cable glands
[mm]
12
Control and
operating
hydraulic
specifications
Pressure regulation range [bar] 1 – 95% full scale without press.
Options Flow sensor
Sensors
Type of pressure sensors Ratiometric (0-5V) / 4:20 mA
Pressure sensor full scale [bar] 16 / 25 / 40
Type of flow sensor supported 5 pulses [Vpp]
Functions and
safety devices
Connectivity
•
Serial interface
• Multi inverter connection
Safety devices
• Dry running
•
Current sensitivity on output phases
• Temperature overload on internal electronics
•
Abnormal power supply voltages
• Direct shorting between output phases
• Fault on pressure sensor
Technical specifications
MCE-55/P MCE-30/P MCE-150/P MCE-110/P
Voltage [VAC]
(Tol +10/-20%)
380-480 380-480 380-480 380-480