SUGGESTED SPECIFICATIONS:
projection screen(s),
(H) x (W).
The Tensioned Advantage® Deluxe screen shall
have two motors, one to operate door and one to operate screen. Door motor electrically
operated 120 volt (60 Hz) not more than 1.2 amp. Shall have motor mounted inside the
roller, to be three wire with ground, quick reversal type, oiled for life, with automatic
thermal overload cutout, integral gears, capacitor and an electric brake to prevent
coasting. To have pre-set but adjustable limit switches to automatically stop fabric door in
the ”down“ position. The door will lift to the closed position where a micro switch shall cut
off the electrical current to the door motor. The roller to be of rigid aluminum. Screen
motor is electrically operated 120 volt (60 Hz) not more than 2.4 amp. Shall have motor
mounted inside the roller, to be three wire with ground quick reversal type, oiled for life,
with automatic thermal overload cutout, integral gears, capacitor and an electric brake to
prevent coasting. To have pre-set but adjustable limit switches to automatically stop
picture surface in the ”up“ and ”down“ positions. The roller to be of rigid metal. Screen
fabric to be seamless, flame retardant and mildew resistant vinyl, with black masking
borders standard. Each side of the fabric to have tab guide cable system to maintain even
lateral tension and hold surface flat. Custom slat bar with added weight maintains vertical
tension on the screen surface. The ends of the slat to be protected by heavy duty plastic
caps enclosing a preset adjustable mechanism for screen tensioning. Case shall be a
white powder coated extruded aluminum. Bottom of case to be self-trimming with a built-
in flange around the bottom of the case. A section of the bottom of the case shall be an
aluminum door equipped with hinges so that it opens and closes automatically with the
lowering and raising of the picture surface. The balance of the bottom of the case shall be
a second hinged aluminum door with manual opening to provide access. Hinges shall be
mounted in a concealed way. Junction box shall be internally integrated into the housing
making it possible to install the housing and wire to the building’s electrical system during
construction. The junction box shall contain a quick connect connector that is mounted
in the housing for easy plug-in connection to the motorized fabric and roller assembly.
The motorized fabric and roller assembly to be installed in the case at the factory or at a
later time at the job site. To be complete with integrated low voltage control unit and three
position control switch and cover plate. Suitable for use in environmental air space in
accordance with section 300-22 (c) of the National Electric Code, and sections 2-128,
12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to be listed
by Underwriters’ Laboratories.
SpECifiCATioN DATA
Video (NTSC 4:3) format Dimensions
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
43" x 57"
109 x 145
72"
183
79¼"
201
102
46.3
50" x 67"
127 x 170
84"
213
90¼"
229
114
51.7
60" x 80"
152 x 203
100"
254
104¼"
265
125
56.7
69" x 92"
175 x 234
120"
305
118¼"
300
148
67.1
87" x 116"
221 x 295
150"
381
145¼"
369
170
77.1
108" x 144"
274 x 366
180"
457
170¼"
432
189
85.7
120" x 160"
305 x 406
200"
508
187¼"
476
203
92.1
HDTV (16:9) format Dimensions
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
45" x 80"
114 x 203
92"
234
102¾"
261
125
56.7
52" x 92"
132 x 234
106"
269
115¼"
293
140
63.5
54" x 96"
137 x 244
110"
279
119¾"
304
145
65.8
58" x 104"
147 x 264
119"
302
128¼"
326
150
68
65" x 116"
165 x 295
133"
338
141¼"
359
163
73.9
78" x 139"
198 x 353
159"
404
166¼"
422
188
85.3
90" x 160"
229 x 406
184"
467
184¼"
405
203
92.3
Wide (16:10) format Dimensions
Viewing Area (H x W)
Nominal Diagonal
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
In.
Cm
Lbs.
Kg
50" x 80"
127 x 203
94"
239
103¼"
262
125
56.7
57½" x 92"
146 x 234
109"
277
116¼"
295
148
67.1
60" x 96"
152 x 244
113"
287
120¾"
307
145
65.8
65" x 104"
165 x 264
123"
312
129¼"
328
150
68
69" x 110"
175 x 279
130"
330
134¾"
342
157
71.2
72½" x 116"
184 x 295
137"
348
142¼"
361
170
77.1
87" x 139"
221 x 353
164"
417
163¼"
415
188
85.3
100" x 160"
254 x 406
189"
480
185¼"
471
203
92.1
Square format Dimensions
Viewing Area (H x W)
Overall Length of Case*
Approx. Ship. Wt.
In.
Cm
In.
Cm
Lbs.
Kg
50" x 50"
127 x 127
73¼"
186
93
42.2
60" x 60"
152 x 152
84¼"
214
104
47.2
70" x 70"
178 x 178
95¾"
243
116
52.6
84" x 84"
213 x 213
112¼"
288
125
56.7
6' x 8'
183 x 244
122¼"
311
140
63.5
8' x 8'
244 x 244
125¾"
319
148
67.1
7' x 9'
213 x 274
136¼"
346
155
70.3
9' x 9'
274 x 274
134¾"
342
159
72.1
8' x 10'
244 x 305
149¾"
380
165
74.8
10' x 10'
305 x 305
146¾"
373
168
76.2
9' x 12'
274 x 366
170¼"
434
189
85.7
12' x 12'
366 x 366
175¼"
445
194
88
*Case length does not include flange
Tensioned Advantage
®
Deluxe Electrol
®
Automatic Electric projection Screen Model
