INSTALLATION GUIDE FOR
Da-Lite NET-100
Page 1: ...INSTALLATION GUIDE FOR Da Lite NET 100 ...
Page 2: ...led computer or third party controller Installation Figure 1 Terminal Block 3 Pin Plug RS 232 Communication 2 Pin Plug 12VDC Output If you did not order your screen with a built in SCB 100 remove the 2 pin and 3 pin connectors from the NET 100 Refer to Fig 2 Once these connections have been made and power is supplied to the SCB 100 the NET 100 will be powered from the SCB 100 Upon a successful con...
Page 3: ...w will pop up asking for a user name and password Leave the user name and password field blank and press the OK button The new window will contain the configuration browser program The menu will be located on the left side of page Click on Network For DHCP click on Obtain IP address automatically and type in the DHCP HostName For Static IP leave the option Use the following IP configuration clicke...
Page 4: ...gh the SCB 100 to the NET 100 you will need to create a TCP IP Winsock connection through HyperTerminal or other emulator program 1 You will be required to create 4 text files in a text editor like Notepad They will be named Up Stop Down and Poll Commands 1u Motor 1 up 2u Motor 2 up 1d Motor 1 down 2d Motor 2 down 1s Motor 1 stop 2s Motor 2 stop P Poll Reports Relay Status NOTE All commands need t...
