D-Link xtreme n duo dap-1522 Page 1 Configuration Download

Page: 1 / 4

Manual Radio Configuration

This article describes how to manually configure a DAP1522 Rev B. for a competition

Configure computer IP

1. Click Start >> Control Panel

Start >> Control Panel to open the Control Panel. Then click View network status

View network status

and tasks

and tasks.

2. Select Change Adapter Settings.

Change Adapter Settings.

3. Right-click

Right-click on the appropriate adapter (typically Local Area Connection) and select

Properties.

4. Click on the Internet Protocol Version 4

Internet Protocol Version 4 line to highlight it, then click Properties

Properties.

5. Select Use the following IP address

Use the following IP address, then enter the IP 192.168.0.51

192.168.0.51 and the Subnet Mask

255.0.0.0.

255.0.0.0. Then click OK

OK.

Manual Radio Configuration

Page 1

Manual Radio Configuration Last Updated: 01-06-2017

Summary of Contents for xtreme n duo dap-1522

Page 1: ...dapter Settings Change Adapter Settings 3 Right click Right click on the appropriate adapter typically Local Area Connection and select Properties Properties 4 Click on the Internet Protocol Version 4...

Page 2: ...begin flashing 4 Hold the reset button on the back of the unit for 10 seconds then release 5 Wait for the light to stop flashing this signals the wireless bridge is starting to reset 6 Wait for the l...

Page 3: ...k Name to your team number 2 Set th Wireless Security Mode Wireless Security Mode to WPA Personal WPA Personal 3 Set the WPA Mode WPA Mode to WPA2 Only WPA2 Only and the Cipher Type Cipher Type to AES...

Page 4: ...tings from the left sidebar 1 Set the IP to 10 xx yy 1 where XXYY is your team number 2 Set the Subnet Mask to 255 0 0 0 3 Set the Default Gateway to 10 xx yy 4 4 Click Save Settings Save Settings Man...