manualshive.com logo in svg

D-Link xStack DWS-3200 Series, Cli Manual

Share
Download
D-Link xStack DWS-3200 Series Cli Manual Download Page 411

User Interface Commands

show history

Page 408 

show history

The 

show history 

Privileged EXEC mode command lists the commands entered in the current session.

Syntax

show history

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

User Guidelines

The buffer includes executed and unexecuted commands. 

Commands are listed from the first to the most recent command.

The buffer remains unchanged when entering into and returning from configuration modes.

Example

The following example displays all the commands entered while in the current Privileged EXEC mode.

Console# 

show version

SW version 3.131 (date 23-Jul-2005 time 17:34:19)

HW version 1.0.0

Console# 

show clock

15:29:03 Jun 17 2005

Console# 

show history

show version

show clock

show history

3 commands were logged (buffer size is 10)

Summary of Contents for xStack DWS-3200 Series






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands