manualshive.com logo in svg

D-Link xStack DWS-3200 Series, Cli Manual

Share
Download
D-Link xStack DWS-3200 Series Cli Manual Download Page 294

DXS/DWS-3200 series CLI Reference Guide

Page 291 

snmp-server set

The 

snmp-server set 

Global Configuration mode command defines the SNMP MIB value.

Syntax

snmp-server set

 

variable-name name1 value1 

[

 name2 value2 …

]

Parameters
•

variable-name

 — MIB variable name (Range 1-160 characters).

•

name value

 — List of name and value pairs. In the case of scalar MIBs, only a single pair of name values. In 

the case of an entry in a table, at least one pair of name and value followed by one or more fields (Range 1-
160 characters).

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

Although the CLI can set any required configuration, there might be a situation where a SNMP user sets a MIB 
variable that does not have an equivalent command. In order to generate configuration files that support those 
situations, the 

snmp-server set 

command is used.

This command is case-sensitive.

Example

The following example configures the scalar MIB sysName with the value 

D-Link

.

Console(config)# 

snmp-server set 

sysName sysname D-Link

Summary of Contents for xStack DWS-3200 Series






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands