DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
54
Description
The
show firmware information
command displays the firmware information.
Parameters
None
Restrictions
You must have administrator privileges.
Example
To show the firmware information:
D G S - 3 2 0 0 - 1 0 : 4 # s h o w f i r m w a r e i n f o r m a t i o n
C o m m a n d : s h o w f i r m w a r e i n f o r m a t i o n
I m a g e I D : 1 ( B o o t u p f i r m w a r e )
V e r s i o n : 1 . 1 0 . B 0 2 1
S i z e : 2 0 7 5 1 9 4 B y t e s
U p d a t e T i m e : 2 0 0 0 / 0 1 / 0 1 0 0 : 5 7 : 4 0
F r o m : 1 7 2 . 1 8 . 2 1 1 . 1 0 8 ( C o n s o l e )
U s e r : A n o n y m o u s
I m a g e I D : 2
V e r s i o n : 1 . 1 0 . B 0 1 4
S i z e : 2 0 7 3 1 4 8 B y t e s
U p d a t e T i m e : 2 0 0 0 / 0 1 / 0 1 0 1 : 0 6 : 5 8
F r o m : 1 7 2 . 1 8 . 2 1 1 . 1 0 8 ( C o n s o l e )
U s e r : A n o n y m o u s
D G S - 3 2 0 0 - 1 0 : 4 #
4-6 show config information
Purpose
Displays the configuration or configuration information.
Format
show config [ current_config | config_in_nvram <config_id 1-2> | information ]