DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
113
11
Modify Banner and Prompt Command List
config greeting_message {default}
config command_prompt [<string 16> | username | default]
11-1 config greeting_message
Purpose
Used to configure the greeting message(or banner).
Format
config greeting_message {default}
Description
Users may enter this command to modify the login banner.
Parameters
Parameters
Description
default
Adding this parameter to the
config greeting_message
command
will return the greeting message (banner) to its original factory default
entry.
Restrictions
1. When users issue the “reset” command, the modified banner will remain in tact. Yet, issuing the “reset
system” will return the banner to its original default value.
2. The maximum character capacity for the banner is 6*80. (6 Lines and 80 characters per line)
3. In the following example, Ctrl+W will save the modified banner only to the DRAM. Users must enter the
“save” command to save this entry to the FLASH memory.
4. You must have administrator privileges.
Example
To edit the banner:
D G S - 3 2 0 0 - 1 0 : 1 2 8 # c o n f i g g r e e t i n g _ m e s s a g e
C o m m a n d : c o n f i g g r e e t i n g _ m e s s a g e
B a n n e r E d i t o r
