D-Link Nuclias Connect Hub Plus DNH-200 User Manual Download Page 25

Page: 25 / 141

Nuclias Connect Hub Plus User Manual

System Settings

Choose

From the Server

as the

Update Method

and configure the following:

Current Firmware Version

Displays the current firmware version

New Firmware

Click

Check

to verify if the current firmware is up to

date.

Auto Update

The system will periodically get the latest version from
the server and update itself.

If this option is enabled,

choose the desired days of a week and the time for
firmware updates.

Click

Save

to save the values and update the screen.

Or choose

From a Local storage

and perform the manual update:

Firmware File

Click

Browse….

to locate the firmware file. The firmware is a bin file

type.

Update

Click this button to start the update process immediately.

Note:

The firmware update will update the firmware for all 3 modules of the Hub. During a

firmware

update, do not power off or reset the device or interrupt the process in any way,

until the operation is complete. Interrupting the update process may corrupt the Hub and
require further RMA services.

System Operation

The

System Operation

page provides you with maintenance functions such as reboot,

restore to factory defaults, and hard disk formatting.

Summary of Contents for Nuclias Connect Hub Plus DNH-200














































































































































Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands

D-Link Nuclias Connect Hub Plus DNH-200, User Manual

Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands