manualshive.com logo in svg

D-Link NUCLIAS CONNECT DIS-3650AP, User Manual, Page: 10 / 101

Share
Download
D-Link NUCLIAS CONNECT DIS-3650AP User Manual Download Page 10

Configuration

10

Manual Configuration

Note: 

The management computer, DHCP server and DIS-3650AP must be in the same subnet.

Use one of the following methods to access the web user interface:

Connecting through Ethernet

1.  Use an Ethernet cable to connect the DIS-3650AP to the switch or router the management computer is connected to.

2.  Manage the access point from a computer. Enter 

dis3650ap.local. 

in the address field of your browser.

3.  Log in to the administration user interface. The default login information is 

 

Username:

 admin

 

Password: 

admin

Connecting Wirelessly

1.  Connect the management computer to the default SSID of the DIS-3650AP, “

dlink

”.

2.  Manage the access point from a computer. Enter 

dis3650ap.local.

 in the address field of your browser.

3.  Log in to the administration user interface. The default login information is 

 

Username:

 admin

 

Password: 

admin

Summary of Contents for NUCLIAS CONNECT DIS-3650AP






































































































Reviews:

No comments