D-Link Nuclias Connect DAP-2622 User Manual Download Page 9

Page: 9 / 86

D-Link DAP-2622 User Manual

Method 2 - PoE without PoE Switch or Router

1. Connect one end of an Ethernet cable into the

Data In

port on the PoE base unit

(not included) and the other end into one port on your switch, router, or computer.

2. Connect one end of an Ethernet cable into the

P+Data Out

port on the PoE base

unit and the other end into the LAN (PoE) port on the access point.

3. Use the supplied power adapter. Connect the power adapter to the

Power In

receptor on the PoE adapter.

4. Connect the power cable to the power adapter and then connect the other end

into a power outlet.

5. Enter

dap2622.local

in the address field of your browser.

6. Log in to the Administration Web pages. The default login information is:

Username:

admin

Password:

admin

DAP-2622

Switch or Router

Power Adapter

PoE Adapter

Summary of Contents for Nuclias Connect DAP-2622























































































Search results

Summary of Contents for Nuclias Connect DAP-2622

Reviews:

Related manuals for Nuclias Connect DAP-2622

Brands by name

Popular brands

D-Link Nuclias Connect DAP-2622, User Manual

Search results

Summary of Contents for Nuclias Connect DAP-2622

Reviews:

Related manuals for Nuclias Connect DAP-2622

Brands by name

Popular brands