D-Link Nuclias Connect DAP-2622 User Manual Download Page 80

Page: 80 / 86

D-Link DAP-2622 User Manual

Configuration File Upload

This page allows the user to backup and recover the current configuration of the access point in case of a unit failure.

Upload Configuration File:

Download Configuration

File:

Upload Nuclias Connect

Network File:

Browse to the saved configuration file

you have in your local drive and click

Upload

to update the configuration.

Click

Download

to save the current

configuration file to your local disk. Note

that if you save one configuration file

with the administrator’s password now,

after resetting your DAP-2622 and then

updating to this saved configuration file,

the password will be gone.

Browse to a Nuclias Connect

configuration file and click

Upload

upload it to the access point.

Summary of Contents for Nuclias Connect DAP-2622























































































Search results

Summary of Contents for Nuclias Connect DAP-2622

Reviews:

Related manuals for Nuclias Connect DAP-2622

Brands by name

Popular brands

D-Link Nuclias Connect DAP-2622, User Manual

Search results

Summary of Contents for Nuclias Connect DAP-2622

Reviews:

Related manuals for Nuclias Connect DAP-2622

Brands by name

Popular brands