D-Link NetDefendOS User Manual Download | Manualshive

Page: 652 / 912

background image

8.8. Radius Relay

Overview

The NetDefendOS feature

RADIUS Relay

is designed for telecom scenarios, such as

Mobile Data

Offloading

(MDO), where

User Equipment

(UE), such as a smartphone, switches from an operator's

wireless network to communicating using WiFi via an

Access Point

(AP). The AP connects the UE

to resources, such as the public Internet, via a NetDefend Firewall with the firewall controlling
this access.

To gain access to the resources behind the NetDefend Firewall, the UE must authenticate itself
via the AP using a RADIUS server. A RADIUS authentication request is sent to NetDefendOS by
the AP which relays it to a RADIUS server. The server's reply is relayed back to the AP and
authenticated users are entered into the NetDefendOS user list so that they can then be granted
access to resources based on NetDefendOS security policies.

Event Sequence During RADIUS Relay Authentication

The following sequence of events occurs with radius relay:

•

The UE requests network access from an AP.

•

The AP sends a RADIUS

Access-Request

to NetDefendOS. Providing the NetDefendOS radius

relay feature has been set up, this request is forwarded to the configured RADIUS server.

•

The RADIUS server either authenticates or does not authenticate the UE by sending a RADIUS

Access-Accept

or

Access-Reject

message back to NetDefendOS. The content of these messages

is examined by NetDefendOS as they are relayed back to the AP.

•

If it is authenticated by the RADIUS server, the UE issues a DHCP request and a DHCP IP lease
from the configured NetDefendOS DHCP server is sent back to the UE.

The DHCP server must be configured so that leases are only be distríbuted to authenticated
clients (the

LeasesRequireAuth

option is enabled).

•

Successful authentication also means that NetDefendOS includes the UE's username in its list
of logged in users (visible with the CLI

userauth

command and through the Web Interface)

and this allows the UE access to resources determined by predefined NetDefendOS security
policies.

Using Group Membership

NetDefendOS security policies can be based on group membership where the UE's membership
in a group determines if access is allowed. If this is the case, the RADIUS server must be specially
configured to send back the group name of the user during authentication. In addition, RADIUS
servers communicating with NetDefendOS must have the

Vendor ID

set correctly. Doing this is

described further at the end of this section.

It is also important that that IP rule or IP policy that allows access by the UE must use an IP
address object for its

Source Network

which has its

Authentication

property (the

UserAuthGroups

property in the CLI) set to the same group name sent back by the RADIUS server. Doing this is
described further in

Section 8.5, “Policies Requiring Authentication”

.

If validation with group membership is not required then the

No Defined Credentials

property of

the IP address object used for the

Source Network

should be enabled.

A symptom that the group name has not been specified for the

Source Network

address object is

Chapter 8: User Authentication

652

«
...
650
651
652
653
654
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Fortinet Pages: 62

Brand: Authonet Pages: 51

Brand: Watchguard Pages: 24

Brand: Sonnet Pages: 6

Brand: PaloAlto Networks Pages: 30

SecPath F1000-AK108

Brand: H3C Pages: 39

Brand: H3C Pages: 59

SecPath F1000-AI-25

Brand: H3C Pages: 70

Brand: Barracuda Pages: 2

Firebox SOHO 6 Wireless

Brand: Watchguard Pages: 2

freeGuard Slim 300

Brand: Freedom9 Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands