D-Link NetDefendOS User Manual Download | Manualshive

Page: 541 / 912

background image

6.5. Anti-Virus Scanning

6.5.1. Overview

The NetDefendOS anti-virus module protects against malicious code carried in files being
downloaded to clients via a NetDefend Firewall. The following can be scanned for viruses:

•

Files downloaded via the firewall. For example, files downloaded using HTTP transfer or FTP
or perhaps or as an attachment to an email.

•

Scripts contained within webpages delivered via HTTP.

•

URLs contained within webpages delivered via HTTP.

Malicious code in downloads can have different intents ranging from programs that merely
cause annoyance to more sinister aims such as sending back passwords, credit card numbers and
other sensitive information. The term "Virus" can be used as a generic description for all forms of
malicious code carried in files.

Combining with Client Anti-Virus Scanning

Unlike IDP, which is primarily directed at attacks against servers, anti-virus scanning is focused on
downloads by clients. NetDefendOS anti-virus is designed to be a complement to the standard
anti-virus scanning normally carried out locally by specialized software installed on client
computers. It is not intended as a complete substitute for local scanning but rather as an extra
shield to boost client protection. Most importantly, it can act as a backup for when local client
anti-virus scanning is not available.

Enabling Using IP Rules or IP Policies

Anti-virus scanning can be enabled using either an

IP Rule

object or an

IP Policy

object and this

section includes examples for using both methods.

Anti-Virus with IP Rules

With an

IP Rule

object, anti-virus scanning is first enabled on the relevant ALG for the targeted

traffic. Then, that ALG is associated with a

Service

object which is in turn is associated with an IP

rule. Anti-virus scanning can be enabled for file downloads associated with the following ALGs:

•

HTTP ALG

•

FTP ALG

•

POP3 ALG

•

SMTP ALG

Note that there is no IMAP ALG but scanning of email attachments in IMAP traffic can be
achieved by enabling anti-virus scanning on IP policies that trigger on that traffic.

Anti-Virus with IP Policies

As shown later in this section, configuring anti-virus scanning using an

IP Policy

object is simpler

than with an

IP Rule

object since it is not necessary to configure separate ALG and service objects.

However, certain ALG options are not available when using IP policies. Such an unavailable

Chapter 6: Security Mechanisms

541

«
...
539
540
541
542
543
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Fortinet Pages: 2

Brand: Draytek Pages: 22

Brand: Watchguard Pages: 2

Brand: ZyXEL Communications Pages: 8

Brand: PaloAlto Networks Pages: 52

Brand: PaloAlto Networks Pages: 34

VigorIPPBX 3510 Series

Brand: Draytek Pages: 269

Brand: Draytek Pages: 304

FortiGate FortiGate-5001FA2

Brand: Fortinet Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands