D-Link NetDefendOS User Manual Download | Manualshive

Page: 395 / 912

background image

5.2. IPv4 DHCP Client

In a NetDefend Firewall, any Ethernet interface or VLAN interface can act as an IPv4 DHCP client
so that the IPv4 address and network for the interface can be assigned by an external DHCP
server. This feature can be enabled or disabled by changing the

Enable DHCP

property for the

interface object in the NetDefendOS configuration. The default settings are as follows:

•

Ethernet interfaces - The default setting for Ethernet interfaces depends on the hardware
platform. For the NetDefendOS product series, consult the relevant hardware guide.

•

VLAN interfaces - DHCP is always disabled by default for VLAN interfaces.

Important: IPv4 DHCP clients are not supported in HA clusters

The IPv4 DHCP client is not supported for interfaces in a NetDefendOS high availability
cluster. If it is enabled in a cluster, this will result in the error message

Shared HA IP

address not set

when trying to commit the configuration.

As soon as DHCP is enabled on an interface and the changed NetDefendOS configuration is
deployed, the following will occur:

•

A DHCP lease request is issued on the DHCP enabled interface.

•

A listening DHCP server will issue a lease to the interface.

•

NetDefendOS will change the IPv4 address and network of the interface to become the
values in the lease.

•

The NetDefendOS address book objects associated with the interface will lose their original
values and take on the value

0.0.0.0

for the IPv4 address and

0.0.0.0/0

for the IPv4 network.

The address book objects will not show the DHCP assigned values although these will be
shown when examining the properties of the interface configuration object.

The same process of requesting a lease will also take place if NetDefendOS is restarted. If the
DHCP is subsequently disabled on an interface, the administrator will need to manually assign
the IPv4 address and network.

Note: The IP address icon changes in the Web Interface

When IP addresses are allocated to an interface, the IPv4 address and network icons
change in the Web Interface display of interface properties so they have an asterisk in
the lower left corner.

The examples below shows how the option is enabled for an Ethernet interface. The procedure is
almost identical for a VLAN interface.

Example 5.1. Enabling an Ethernet Interface as a DHCP Client

This example shows how to enable the Ethernet interface

If1

as a DHCP client.

Command-Line Interface

gw-world:/> set Interface Ethernet If1 DHCPEnabled=Yes

Chapter 5: DHCP Services

395

«
...
393
394
395
396
397
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Firebox SOHO 6.1

Brand: Watchguard Pages: 140

Brand: Lanner Pages: 16

SecPath F5000-A

Brand: H3C Pages: 62

SecPath NS-HTIM-GMG2A

Brand: H3C Pages: 17

Brand: Silicon Graphics Pages: 306

Brand: Watchguard Pages: 2

Brand: Dell Pages: 74

SonicWALL NSA 6600

Brand: Dell Pages: 57

Brand: Dell Pages: 49

SonicWALL GX250

Brand: Dell Pages: 200

Brand: Hawking Pages: 2

Brand: ETIC Pages: 42

Brand: ETIC Pages: 80

Brand: Avanu Pages: 141

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands